This project teaches us on how the simple stick used with supergun that wire the stick and build pad hacks to use the stick on of your favorite systems.
It is a PCB so you could drill holes and add PCB feet and mount it to the bottom of the case making it easier to have the board stick out a bit for those hard to get at PCB’s. The atx psu wires on the inside have the psu on wire soldered to ground. Use a scart selector to choose what system is being encoded. The video is wired into a simple 5 pin connector.
The main stick is composed of Seimitsu ls32 installed and with the restrictor plate removed.